Fluorocarbon finish paint machinery chemical industry coatings fluorocarbon topcoat
Product Description
Fluorocarbon topcoats are usually composed of the following main ingredients:
1. Fluorocarbon resin: As the main curing agent, it gives fluorocarbon finish excellent weather resistance and chemical resistance.
2. Pigment: Used to color fluorocarbon topcoat to provide decorative effect and hiding power.
3. Solvent: used to adjust the viscosity and drying speed of fluorocarbon topcoat, common solvents include acetone, toluene and so on.
4. Additives: such as curing agent, leveling agent, preservative, etc., used to adjust the performance and process characteristics of fluorocarbon finish.
After reasonable proportion and process treatment, these components can form fluorocarbon topcoats with excellent properties.
Technical specification
| Appearance of coat | The coating film is smooth and smooth | ||
| Color | White and various national standard colors | ||
| Drying time | Surface dry ≤1h (23°C) Dry ≤24 h(23°C) | ||
| Fully cured | 5d (23℃) | ||
| Ripening time | 15min | ||
| Ratio | 5:1 (weight ratio) | ||
| Adhesion | ≤1 level (grid method) | ||
| Recommended coating number | two, dry film 80μm | ||
| Density | about 1.1g/cm³ | ||
| Re-coating interval | |||
| Substrate temperature | 0℃ | 25℃ | 40℃ |
| Time length | 16h | 6h | 3h |
| Short time interval | 7d | ||
| Reserve note | 1, coating after the coating, the former coating film should be dry, without any pollution. 2, should not be in rainy days, foggy days and relative humidity greater than 80% of the case. 3, before use, the tool should be cleaned with diluent to remove possible water. should be dry without any pollution |
||
Product features
Fluorocarbon topcoat is a high-performance paint that is commonly used for metal surface protection and decoration of buildings. It uses fluorocarbon resin as the main component and has excellent weather resistance, chemical resistance and wear resistance. The main features of fluorocarbon finish include:
1. Weather resistance: fluorocarbon topcoat can resist the erosion of natural environment such as ultraviolet light, acid rain, air pollution for a long time, and maintain the color and luster of the coating.
2. Chemical resistance: has good chemical resistance, can resist acid and alkali, solvent, salt spray and other chemical substances erosion, protect the metal surface from corrosion.
3. Wear resistance: high surface hardness, wear resistance, not easy to be scratched, to maintain long-term beauty.
4. Decorative: A variety of colors are available to meet the decorative needs of different buildings.
5. Environmental protection: fluorocarbon finish is usually water-based or low-VOC formula, which is environmentally friendly.
Due to its excellent performance, fluorocarbon topcoat is widely used in the protection and decoration of metal components, curtain walls, roofs and other surfaces of high-grade buildings.
Product Specifications
| Color | Product Form | MOQ | Size | Volume /(M/L/S size) | Weight/ can | OEM/ODM | Packing size/ paper carton | Delivery Date |
| Series color/ OEM | Liquid | 500kg | M cans: Height: 190mm, Diameter: 158mm, Perimeter: 500mm,（0.28x 0.5x 0.195） Square tank： Height: 256mm, Length: 169mm, Width: 106mm,（0.28x 0.514x 0.26） L can: Height: 370mm, Diameter: 282mm, Perimeter: 853mm,（0.38x 0.853x 0.39） |
M cans: 0.0273 cubic meters Square tank： 0.0374 cubic meters L can: 0.1264 cubic meters |
3.5kg/ 20kg | customized accept | 355*355*210 | Stocked item: 3~7 working-days Customized item: 7~20 working days |
Scope of application
Fluorocarbon finish is widely used in metal surface protection and decoration of buildings because of its excellent weather resistance, chemical resistance and decoration. Specific application scenarios include:
1. Building exterior wall: used for the protection and decoration of metal curtain wall, aluminum plate, steel structure and other building exterior walls.
2. Roof structure: suitable for corrosion prevention and beautification of metal roofing and roof components.
3. Interior decoration: Used for the decoration and protection of metal ceilings, metal columns, handrails and other indoor metal components.
4. High-end buildings: metal components for high-end buildings, such as business centers, hotels, villas, etc.
In general, fluorocarbon topcoats are suitable for construction metal surfaces that require high weather resistance, high chemical resistance and decoration, and can provide long-term protection and beautification effects.
Storage and packaging
Storage: must be stored in accordance with national regulations, the environment is dry, ventilated and cool, avoid high temperature and far from the fire source.
Storage period: 12 months, after the inspection should be used after qualified.
