Wear-resistant aggregate penetrating curing agent flooring

Product Description

Concrete penetrating sealer polishing system is for the new and old Naijia aggregate floor through the infiltration of concrete sealer and the cement in the Naijia aggregate floor into a series of chemical reactions.

The half-chemical cement, stored ionised calcium and silicon oxide substances contained in the cement in the cement of Naijia Aggregate Ground can be obtained through a series of chemical reaction, thus obtaining a dust-free, dense, highly wear-resistant and steel-like hardness.

Through the special machinery to carry out different degrees of rent grinding, fine grinding, fine grinding, polishing and a series of process construction, so as to get a beautiful, dust-free, dense, highly wear-resistant and hard, steel-like ground.

Through a series of process construction such as different degrees of rent grinding, fine grinding, fine grinding, polishing and so on by special machinery, we can get a beautiful, dust-free, dense, highly wear-resistant and marble-like luster of the wear-resistant aggregate floor.

Scope of application

Widely used in industrial plants, logistics warehouses, supermarkets, underground car parks, office laboratories and other places where dustproof, wear-resistant, pressure-resistant performance of wear-resistant aggregate floor is highly required.

laboratory and other wear-resistant aggregate base surface places.

Product performance

- Beautiful and dust proof, hard and wear-resistant.

- Anti-pressure and anti-seepage, long-lasting lustre.

- Energy saving and environmental protection, simple maintenance.

- Normal service life is more than 20 years.

Construction process

Base surface treatment Cleaning Sweeping Cleaning the cement base floor.

Rough grinding Grind the ground with different levels of coarse resin abrasive discs by professional grinding machinery, and clean the ground with water or large-scale vacuum cleaner to remove sewage slurry.

At the same time, use water to clean or use large hoover to remove the sewage slurry on the ground.

Under the material will be "ground Heng" penetration type concrete sealing curing agent soaked to the construction area ground, and keep the ground wet soaking time of about 1 hour, when the surface becomes viscous when the surface with water to clean the surface; dry 12 hours, according to the strength of the different concrete ground conditions, can be repeated a number of times the immersion material process, until the overall strength of the concrete ground to meet the polishing of the ground.

After 12 hours of solid drying, according to different strength condition of concrete floor, the soaking material process can be repeated several times until the overall strength of concrete floor meets the polishing requirements.

Fine grinding Through the professional grinding machinery with different levels of coarse resin grinding pads on the ground in order to carry out the overall grinding process step by step, and at the same time, clean up with water or use large-scale vacuum cleaner to remove sewage slurry on the ground.

At the same time, clean the ground with water or use a large hoover to remove the sewage slurry on the ground.

Polishing After the ground is polished by professional polishing machinery with polishing pads at high speed, the concrete ground can be formed with marble-like luster.

10 advantages of concrete penetration sealing the curing agent


Hard and wear-resistant Breathing function avoids the disadvantages of concrete

Reacts with substances in concrete to form a hard substance. Although it can prevent most of the chemical and liquid impurities from entering the concrete.

It can block the structural pores of the concrete and greatly improve the concrete's entry into the concrete, but at the same time, it allows the water of gas to freely enter the concrete.

The hardening and abrasion resistance of the surface layer of the soil, forming a long-lasting similar large circulation, allowing the concrete to "breathe", thus avoiding the need for a "stone-like" protective layer, hardness and wear resistance.

The hardness and abrasion resistance of the concrete can be improved by a protective layer like a marble, and the characteristics of concrete such as bulging, peeling and micro-cracking can be eliminated.

The hardness of Moh's 8-9 degrees.

Effective sealing Bright and non-slip

Hardening system will seal the concrete into a firm week entity, after treatment, the grass-roots level of the ground will appear charming light, and can penetrate into the concrete lining.

And can penetrate into the concrete layer, from the internal sealing of concrete bright anti-slip, and by the continuation of the use of time, the surface and the

After the treatment, the concrete will become firm and solid. Effective The appearance will be better. In fact, it is the user's unconscious

The concrete's life span is prolonged. The concrete can be polished and cleaned more easily by inhibiting the entry of external pollutants into the concrete.

Resistant to chemical attack, durable and maintenance-free

The chemical structure of the gel and the unique characteristics of the material make it durable and maintenance-free, and the permanent protection of a single application is a kind of use.

After use, the concrete surface will become dense and smooth, and the flooring material will not require repeated maintenance for a long time, and after the completion of the work, it can be used as a flooring material.

Effective hollowing out and resistance to chemical substances into the concrete The next process to select other construction dirt is particularly easy to clean.

The floor is particularly easy to clean, preventing chemicals from eroding and damaging the concrete. It is easy to wash and protect the finished floor.

Thorough dust control

Dust generated by weathering of the concrete will stay in the space of the goods colourless. Odourless, with no organic solvent emissions, it meets the requirements of provincial regulations.

Penetrating sealing and hardening materials for goods, shelves and equipment make it easy to change the concept of environmental protection, health and safety.

Combined with the salt in the concrete, it becomes an indispensable part of the concrete to improve the problem of old, low-quality concrete surfaces.

In addition to the salt in the concrete, penetrating sealer effectively prevents the soil from being mixed with the surface. It is easy to work with, non-toxic and odourless, so it can be produced at the same time.

It protects the equipment from dust, protects the goods, and can be quickly put back into use while the work is being carried out.

Shelves are free from dust particles.

Good ageing resistance Strong penetration

No yellowing, resistant to whitening phenomena. General flooring materials Excellent penetration, can penetrate into the concrete 5-8mm

After a long time of use, the colour will produce obvious changes, and the inner layer, effectively sealing the concrete pores from the inside, mixing

and whitening phenomenon caused by wear and tear. The concrete can be more solid and durable.