Alkyd reddish primer

Product alias

  • Alkyd reddan antirust paint, alkyd reddan intermediate paint, alkyd reddan anticorrosive coating, alkyd reddan paint.

Basic parameters

Product English name  Alkyd red lead paint
Dangerous Goods No.  33646
UN No.  1263
Organic solvent volatility  64 standard metre³.
Brand  Jinhui Paint
Model No.  C52-3-4
Colour  Grey
Mixing ratio  Single component
Appearance  Smooth surface

Product composition

  • Alkyd reddan primer is a one-component reddan primer composed of alkyd resin, reddan powder, antirust pigmented filler, additives, No.200 solvent gasoline and mixed solvent, and catalytic agent.

Pre-course matching

  • Directly painted on the surface of steel whose rust removal quality reaches Sa2.5 grade.

Backstage matching

  • Alkyd intermediate paint and alkyd paint.

Technical parameters: GB/T 25251-2010

  • Status in the container: no hard lumps after stirring and mixing, in a homogeneous state.
  • Fineness: ≤50um (standard index: GB/T6753.1-2007)
  • Adhesion: first class (standard index: GB/T1720-1979(89))
  • Drying time: surface drying ≤ 5h, real drying ≤ 24h (standard index: GB/T1728-79)
  • Salt water resistance: 3% NaCl, 48h without cracking, blistering, peeling (standard index: GB/T9274-88)

Surface treatment

  • Steel surface sandblasting treatment to Sa2.5 grade, surface roughness 30um-75um.
  • Electrical tools descaling to St3 grade.


  • Suitable for steel surface, machinery surface, pipeline surface, equipment surface, wood surface.

Paint construction

  • After opening the barrel, it must be stirred evenly, left to stand, and after maturing for 30min, add appropriate amount of thinner and adjust to the construction viscosity.
  • Diluent: special diluent for alkyd series.
  • Airless spraying: Dilution amount is 0-5% (by weight ratio of paint), nozzle calibre is 0.4mm-0.5mm, spraying pressure is 20MPa-25MPa (200kg/cm²-250kg/cm²).
  • Air spraying: Dilution amount is 10-15% (by weight ratio of paint), nozzle calibre is 1.5mm-2.0mm, spraying pressure is 0.3MPa-0.4MPa (3kg/cm²-4kg/cm²).
  • Roller coating: Dilution amount is 5-10% (in terms of paint weight ratio).


  • In the high temperature season construction, easy to dry spray, in order to avoid dry spray can be adjusted with thinner until not dry spray.
  • This product should be used by professional painting operators according to the instructions on the product package or this manual.
  • All coating and use of this product must be carried out in accordance with all relevant health, safety and environmental regulations and standards.
  • If in doubt as to whether this product should be used, please contact our technical service department for details.


  • 25kg drum

Transport Storage

  • The product should be stored in a cool and ventilated place, prevented from direct sunlight, and isolated from sources of ignition, away from heat sources in the warehouse.
  • When transporting the product, it should be prevented from rain, sunlight exposure, avoid collision, and should comply with the relevant regulations of the traffic department.

Safety Protection

  • The construction site should have good ventilation facilities, and painters should wear glasses, gloves, masks, etc. to avoid skin contact and inhalation of paint mist.
  • Smoking and fire are strictly prohibited at the construction site.