Alkyd reddish intermediate paint

Product also known as

  • Alkyd reddan antirust paint, alkyd reddan paint, alkyd reddan anticorrosive coating, alkyd reddan primer.

Basic parameters

Product English name  Alkyd red lead paint
Dangerous Goods No.  33646
UN No.  1263
Organic solvent volatility  64 standard metre³.
Brand  Jinhui Paint
Model No.  C52-3-2
Colour  Grey
Mixing ratio  Single component
Appearance  Smooth surface

Product Ingredients

  • Alkyd reddan intermediate paint is a single-component reddan intermediate paint composed of alkyd resin, reddan powder, antirust pigment filler, additives, No.200 solvent gasoline and mixed solvents, and catalytic agent.

Technical parameters: GB/T 25251-2010

  • Status in the container: no hard lumps after stirring and mixing, in a homogeneous state.
  • Adhesion: first class (standard index: GB/T1720-1979(89))
  • Fineness: ≤50um (standard index: GB/T6753.1-2007)
  • Salt water resistance: 3% NaCl, 48h without cracking, blistering, peeling (standard index: GB/T9274-88)
  • Drying time: surface drying ≤ 5h, solid drying ≤ 24h (standard index: GB/T1728-79)

Surface treatment

  • Steel surface sandblasting treatment to Sa2.5 grade, surface roughness 30um-75um.
  • Electrical tools descaling to St3 grade.

Front course matching

  • Directly painted on the steel surface whose rust removal quality reaches Sa2.5 grade.

Back course matching

  • Alkyd iron intermediate paint, alkyd paint.


  • Suitable for steel surface, machinery surface, pipeline surface, equipment surface, wood surface.

Paint construction

  • After opening the barrel, it must be stirred evenly, left to stand, and after maturing for 30min, add appropriate amount of thinner and adjust to the construction viscosity.
  • Diluent: special diluent for alkyd series.
  • Airless spraying: Dilution amount is 0-5% (by weight ratio of paint), nozzle calibre is 0.4mm-0.5mm, spraying pressure is 20MPa-25MPa (200kg/cm²-250kg/cm²).
  • Air spraying: Dilution amount is 10-15% (by weight ratio of paint), nozzle calibre is 1.5mm-2.0mm, spraying pressure is 0.3MPa-0.4MPa (3kg/cm²-4kg/cm²).
  • Roller coating: Dilution amount is 5-10% (in terms of paint weight ratio).


  • In the high temperature season construction, easy to dry spray, in order to avoid dry spray can be adjusted with thinner until not dry spray.
  • This product should be used by professional painting operators according to the instructions on the product package or this manual.
  • All coating and use of this product must be carried out in accordance with all relevant health, safety and environmental regulations and standards.
  • If in doubt as to whether this product should be used, please contact our technical service department for details.

Transport Storage

  • The product should be stored in a cool and ventilated place, protected from direct sunlight, and isolated from sources of ignition and kept away from heat sources in a warehouse.
  • Products should be protected from rain, sunlight and collision when transported, and should comply with the relevant regulations of the traffic department.

Safety Protection

  • The construction site should have good ventilation facilities, and painters should wear glasses, gloves, masks, etc. to avoid skin contact and inhalation of paint mist.
  • Smoking and fire are strictly prohibited at the construction site.